Fiber Optic Cable Specifications and Source
CSP, Inc. can provide you with reliable fiber assemblies certified to function properly with DigiBoard equipment.
Fiber is the best solution for transmitting large amounts of data over long distances at high speeds without interference
or lost data caused by outside factors such as weather, radio frequency signals or other electrical noise.
The ST connector provides these features as well as strong performance and reliability
characteristics. The ST connector
also helps maintain close tolerances when mating connectors in an adapter. The ST connector is easily
recognizable because
of its bayonet style attachment/detachment mechanism.
The ST also offers superior loss characteristics because the ferrules are made of stainless steel or ceramic and the connector
has a spring-loaded mating system that exerts consistent pressure on the ferrule tip when inserted in an
active device or an adjoining
fiber. These impressive characteristics have allowed the ST connector to become the most widely used connector in Local
Area Networks (LANs).
CSP fiber optic assemblies are made at the length you specify with or without an optional pulling eye to meet your individual requirements.
CSP assemblies are made with FDDI grade fiber and tested to meet EIA/FOTP specifications. CSP complies with the requirements
of the 1990 National Electrical Code (NEC) for Optical Fiber Cables - Article 770.
Specifications:
Fiber Type.......................Glass Graded Index
Core Diameter.................62.5 um
Cladding Diameter...........125 um
Tight Buffer Diameter.......900 um
Numerical Aperture..........>.27
Connector........................ST Stainless
Cable Type......................Duplex (Zipcord)
Orange Jacket
Cable Parameters (OFNR, OFNP)
Manufacturer Montrose Montrose
Part Number FBB-022R-2 FBB-022P-2
Weight 15 kg/km 20 kg/km
Diameter 3.0x6.5 mm 3.0x6.5 mm
Jacket PVC Plenum rated
Operating Load 450N 450N
Installation Load 700N 700N
Operating Bend Radius 25 mm 25 mm
Installation Bend Radius 4 mm 4 mm
Impact Resistance 20 impacts w/1.0N-m(EIA-425-25)
Crush Resistance 500 N/cm 500 N/cm
Flexing 5000 5000
Operating Temperature -40 C to 85 C -40 C to 85 C
Storage Temperature -55 C to 85 C -55 C to 85 C
Flame Retard UL-1666 OFNR UL-910 OFNP
Connector
Type ST
Ferrule Material Stainless Steel
Termination Break Strength 30 lbs.
Connection Loss 0.6 Typical
Wave Length 850 nm
1300 nm
Attenuation
3.25 db/km max. 1.25 db/km max.
Bandwidth
160 MHz/km
500 MHz/km
Part Numbers
Meters Feet
PVC Part #
Plenum Part #
1
3.28
DBI62140001
DBI62140001-P
10
32.8
DBI62140010
DBI62140010-P
50
164.04
DBI62140050
DBI62140050-P
100
328.08
DBI62140100
DBI62140100-P
250
820.2
DBI62140250
DBI62140250-P
500
1640.4
DBI62140500
DBI62140500-P
750
2460.6
DBI62140750
DBI62140750-P
1000
3280.8
DBI62141000
DBI62141000-P
Per customer order
DBI6214MMMM DBI6214MMMM-P
Please contact Dave Beran for more information: 1-800-932-9821
CSP,Inc. 14305 N. 21st Avenue Minneapolis, MN 55447
1-800-422-2537 In MN (612) 476-6866 FAX (612) 476-6966
